PyraLite (Pyramidic Rooflight)
Features:
One Piece Moulded PyraLite™ Rooflights
- PyraLite™ rooflights are manufactured in Polycarbonate, high impact and standard Acrylic in either clear, opal or tinted finishes.
- A large basic standard size range from 500mm square to 1800mm square, other sizes up to
- 2400mm square may be determined by the availability of material. Large sized PyraLite™ skylights are more suitable fixed to a horizontal support upstand.
- PyraLite™ rooflights are fabricated in Zincalume or Colourbond flashings in either square or round bases to suit timber, steel or concrete upstands, powdercoated aluminium frames and bases are also available depending on specified requirements.
- PyraLite™ rooflights can be fabricated as equal sided of elongated pyramids. Segmented Glass Glazed PyraLite™ Rooflight
- Glass glazed PyraLite™ rooflights give great flexibility to produce virtually unlimited sizes (5m square and larger) using Belle Design proprietary ‘BGB’ Intalok glazing bar - which has been tested to cyclonic conditions in accordance with Australian Standards AS 1664.2-1997 aluminium structures code.
- PyraLite™ segmented glass glazed available in Polycarbonate and Acrylic also. Rooflights can be powdercoated to any nominated colour.
- Design service, engineering computations and technical assistance available.
To specify:
When ordering quote:
Belray PyraLite
Vented or Non-Vented, opal, clear or grey tint,moulded one piece glazing, roof type, roof material, roof colour if required, roof pitch, and as PyraLites are fitted on a square base, internal shaft size required. Belle will advise upstands required to suit your internal measurements.
When ordering quote:
Belray PyraLite
Vented or Non-Vented, opal, clear or grey tint,moulded one piece glazing, roof type, roof material, roof colour if required, roof pitch, and as PyraLites are fitted on a square base, internal shaft size required. Belle will advise upstands required to suit your internal measurements.
